TELEX IP-224 Dual IP Remote Adapter Panel

IP-224 is the IP radio gateway at the heart of the Telex Radio Dispatch System.

Telex radio dispatch systems offer the ultimate in interoperability, reliability, and scalability for RoIP/VoIP communications.

Based upon the Linux operating system, the IP-224 radio gateway provides an extremely reliable means of remote-controlling two audio devices. The IP-224 can be easily configured to work with both digital and analog consoles, and it performs a wide variety of other tasks related to using radios on a digital network, including state-of-the-art system diagnostics, SNMP, redundant Ethernet connections and a wide range of advanced radio interfaces such as P25, NXDN, MOTOTRBO, DMR, and TETRA.

Available in both standard and advanced interface configurations
Field upgradeable to advanced interface
Local/Tone/Console modes, Line-Line- Crosspatch
PTT, monitor, F1 and F2 relays (programmable to any function tone or revert to F1)
Four PTT modes and three monitor modes
Nine selectable PTT frequencies in Tone Mode
Eight digital outputs for channel selection, completely programmable per function tone
CTCSS generation (64 frequencies)
Software gain control
Local handset port for monitoring activity and transmission back to base or to radio, uses optional AHS-1 handset
RX AGC, RX audio squelch
Dual Ethernet ports and support for SNMP
ANI over-the-air-protocol decode and display
SoIP (Serial-over-Internet-Protocol)
Supports USB, RS485, CAN-bus, RS232, TTL
Backwards compatible with Telex Radio Dispatch equipment
Web browser based setup and configuration
Single or dual function tone generation
Guard tone User-selectable for 2100 Hz, 2175 Hz, 2300 Hz, 2325 Hz, 2400 Hz, 2600 Hz, 2800 Hz, 2850 Hz, or 2900 Hz
Menu driven front panel controls for TX, RX, spare audio, IP addressing, and CTCSS
Handles channels or talk groups up to 1,000
MDC-1200 and Fleetsync encode and decode
Telex System Manager supported for firmware and configuration

We offer the complete line of TELEX radio dispatch systems and software.

Request a Quote

Give us a call at 303-850-9000 or chat with us today to learn more about the Telex Radio Dispatch systems and how it can benefit your public safety agency!

Common features	Kenwood Serial	P25	NEXEDGE^®	IDAS^™	MOTOTRBO^™	TETRA^™	DMR	SDC
Channel & zone change	✓	✓	✓	✓	✓	✓	✓
ANI decoding	✓	✓	✓	✓	✓	✓	✓	✓
Emergency decode	✓	✓	✓	✓	✓	✓*	✓*	✓
Emergency Acknowledgement	✓	✓	✓		✓
Status message decoding	✓*	✓	✓	✓	✓	✓	✓*	✓
Status request	✓	✓*	✓		✓	✓
Monitor ON/OFF	✓	✓	✓	✓	✓
Scan ON/OFF	✓	✓	✓	✓			✓*
Individual call	✓*	✓*	✓		✓	✓	✓	✓
Group call	✓*	✓*	✓		✓	✓	✓	✓
Radio enable/disable	✓*	✓*	✓		✓		✓

*Not available for some radios

Control Type	32-bit Digital Media Processor
Width	8.5″ (215.9 mm)
Depth	11.5″ (292.1 mm)
Height	1.625″ (41.3 mm)
Power Requirements	+11Vdc to +16Vdc, 600mA nominal at 12Vdc
Tone Frequencies	Single or dual function tone generation Function tone range 0 Hz–3200Hz adjustable in 1Hz increments, Total tone duration 0 ms–999ms, Tone magnitude -60dB to +12dB
Vocoders	Telex 32K (50 kbits/sec simplex), G.726 16K (34 kbits/sec simplex) G.726 32K (50 kbits/sec simplex), G.711 (82 kbits/sec simplex)
Digital I/O Ratings	Pull up/pull down/float 3.3VDC/5VDC/12V 10K Ohm pull up/pull down
Weight	4.125lbs (1.9kg)
Transmit Output Impedance	600 Ohms for balanced mode, 200 Ohms for single-ended mode
Receive Input Impedance	10/600/10K Ohms (user-selectable)
Audio Distortion	2% THD max
Audio Frequency Response	300Hz to 3000Hz + 1, -3dB less than 3% distortion
Relay Contact Ratings	1A at 63V AC/DC
LAM Sensitivity	-50dB to +10dB
Ethernet Speed	10BaseT or 100BaseTX
COR Sensitivity	User-selectable rising or falling edge from radio
Storage Temperature	-30°C to 65°C (-22°F to 149°F) for full specifications
DTMF Detection Bandwidth	±25Hz around center of frequency
Operating Temperature	0°C to 50°C (32°F to 122°F) for full specifications
Monitor Timer	10ms to 9999ms, adjustable
Flash Memory	128MB
SDRAM Memory	256MB
Electro Static Discharge Immunity	8kV on all exposed operator control areas At 8kV no operation is disturbed At 8kV no permanent damage
Lease Line	2-Wire and 4-Wire supported
Line Protection	Fast-action solid state surge protection
Radio Interface	±45Vdc withstand rating
Memory Protection	Settings preserved in non-volatile memory
Hum & Noise	60dB below rated output for each line
Level Controls	Menu driven front panel controls for TX, RX, spare audio, and CTCSS
Non-Relay Outputs	Open collector, active low, 200mA max., 40V collector to emitter voltage
Radio Input Level	10mVp-p to 10Vp-p, adjustable
Line Output Level	10mVp-p to 10Vp-p, adjustable (Single Ended), 20mVp-p to 40Vp-p, adjustable (Balanced)

Telex Radio Dispatch – IP 224 Introduction

Telex IP-224 features and options

View some of our radios and dispatch products that Triple C Communications has to offer:

KENWOOD NX-1000 Series

VHF/UHF TRANSCEIVERS

KENWOOD NX-3000 Series

VHF/UHF DIGITAL TRANSCEIVER MULTI-PROTOCOL DIGITAL AND ANALOG PORTABLE RADIOS

KENWOOD NX-5000 Series

VHF/UHF/700-800 MHz DIGITAL TRANSCEIVER

KENWOOD VP-5000 Series

UHF (HIGH & LOW), VHF, 700/800 MHZ, P25 PHASE 1 & 2. P25 - PUBLIC SAFETY RADIO

KENWOOD VM-5000 Series

UHF/UHF/700MHz/800MHz. P25 - PUBLIC SAFETY MOBILE RADIO

KENWOOD VP-8000 Series

Multi-Band (VHF, UHF, 700/800 MHz), Mission Critical P25 - PUBLIC SAFETY MOBILE RADIO

KENWOOD VM-8000 Series

Multi-Band operation (VHF, UHF, 700/800 MHz). P25 - PUBLIC SAFETY MOBILE RADIO

TELEX IP-224 Radio Gateway

Dual IP remote adapter panel for the TELEX Radio Dispatch System

Mindshare Radio Interface 2 (MRI2)

The next generation in radio gateways for misson-critical organizations

Triple C Communications is an authorized KENWOOD dealer in Denver, Colorado. All information and images supplied by JVCKENWOOD Corporation and are subject to change.